If you have encountered the no sound on iPhone problem, then you have probably faced any or all of the following issues. The speaker of your iPhone has stopped working or it is not ringing altogether.
You can’t see the volume bar or you can’t hear anything unless you plug in your earphones. Or it could be that the sound from the iPhone speaker is a bit distorted. Whatever be the case, there is no sound on iPhone and it needs to be fixed immediately.
If you are looking to fix the no sound on iPhone error, then look no further. Keep in mind that these measures for the no sound on iPhone problem are meant for iOS 12. But they will also work in case you possess an older version.
Apart from that, some of the measures will simultaneously point out the causes of the no sound on iPhone problem as well.
Follow these steps to fix no sound on iPhone issue. Firstly, you must test the iPhone speakers and then adjust the ring/silent switch. Now, you need to disable the Do Not Disturb option and Bluetooth. This should resolve the no sound on iPhone issue. Also, check the sound settings of third-party apps.
If these basic steps do not resolve the issue then please check the following tips as these will surely help you get rid of the volume not working on iphone problem permanently.
1. Testing the speaker of iPhone
This is the primary measure to fix the no sound on iPhone problem.
- Open Settings and then search for Sounds & Haptics.
- There, you will need to search for the option that says Ringers and Alerts.
Moving the slider to your right will increase its volume. When you hear the sound, it means the speaker is working. If there is no sound on iPhone, it will need a hardware repair.
2. Adjusting the iPhone’s Ring/Silent switch
This is the next most preferred method of solving the sound not working on iPhone problem. This switch is also referred to as the Mute switch, having two positions. Pushing the switch to the back of your iPhone means setting the silent mode on your iPhone.
This is revealed from the orange colour. If you push it the other way, it will disable the silent mode. In other words, the no sound on iPhone problem can be because you accidentally enabled the silent mode.
3. Disable Do Not Disturb
The Do Not Disturb option of the iPhone disables all kinds of alerts and sounds. You may face the no sound on iPhone problem because you have enabled Do Not Disturb.
- To disable it, open Settings.
- Go to Do Not Disturb, and move the switch.
This will disable Do Not Disturb and you won’t have to deal with the no sound on iPhone error.
4. Disable Bluetooth to solve no sound on iPhone problem
Another cause of the sound not working on iPhone problem is if your device is connected to another device via Bluetooth. For example, if you have connected a pair of wireless earphones to your iPhone, you won’t be able to hear anything.
You can solve fix this no sound on iPhone error, by simply switching off Bluetooth.
5. Adjusting volume buttons
It may be the case that you hear no sound on iPhone because the volume has been turned down. To increase the volume, open the Music app or the Podcasts app and press the button that increases the volume.
You may also hear no sound on iPhone because the sound has been set very low. This can be fixed by opening the app and moving the slider to its right so that the volume increases.
6. Checking the sound settings of third-party apps
A third-party app may come with its own sound settings causing the no sound on iPhone error. If you are playing a certain game, it will have its own settings pertaining to music, volume, sound effects, etc.
Open the audio settings of such apps and switch off the customized settings. Now check if there is still no sound on iPhone.
7. Checking for any notifications
The sound settings of your iPhone may have some notifications that you haven’t checked. These notifications may help you solve the no sound on iPhone error.
Apps like Messages and Reminders allow you to choose a sound for notification. You might hear no sound on iPhone if you have set this sound to None, thereby making the alert silent.
8. Clearing all the debris
This is a very rare cause of the no volume on iPhone error, especially if you don’t keep your iPhone in a clean space. Clean the receiver mesh and speakers carefully with the help of a brush.
The brush needs to be soft and dry. You may also apply a bit of acetone so that the extra dirt can be extracted out. Check whether or not you still hear no sound on iPhone.
9. Using earphones
Look for the earphones that was part of the iPhone set. Plug them in and listen to an audio file. Now remove them and listen to the same audio file. You may hear no sound on iPhone because the device is stuck in the earphone mode.
Plugging in and out is helpful in resetting the iPhone. This is also one of the most preferred techniques of solving the no volume on iPhone error. I know it sounds like a very simple solution but trust me, it helps a lot of time. People forget that their iPhone is connected to airpods and that is why they are getting no sound on iPhone.
So, there is nothing wrong with your iPhone in this case. You just need to disconnect the airpods to enable the speaker’s sound.
10. Restarting the iPhone
Chances are that despite all the above methods, you may still experience the iPhone volume not working issue. In such a case it is recommended that you restart your iPhone. Turn it off and then on again. The no sound on iPhone error may be caused by some kind of a bug.
Restarting the iPhone will not lead to erasing of your phone data. This method is generally supposed to fix the no sound on iPhone error.
This especially helps if you haven’t performed a reboot on your iPhone for a long time. A lot of temporary files and junk accumulated on the system. When you open and close apps, there are some files that do not get closed properly and they still take up the memory space and CPU cycles.
Rebooting the iPhone will make sure that all those files have been closed properly and that your system is afresh now. You should do a reboot regularly to keep your iPhone working most efficiently.
11. Checking all app updates
Very rarely you may hear iPhone volume not working due to an error in the app. Just open App Store and go to Updates to see whether or not there is pending update and then do the needful.
This is step is helpful if you are facing no sound on iPhone issue on a particular app only. Updating an app gets rid of many existing bugs and makes the app better and more efficient for us. If the old version of an app is causing issues then updating the app might help you get rid of the same because chances are that the developer of that app has fixed it in the update.
12. Checking all system updates
Updating the iOS can also prove to be a potential solution to the no sound on iPhone error. If there are software updates, don’t waste any time to download and install them.
Regular updates make your iPhone faster and remove the existing issues. You will see that a lot of your current iPhone problems are solved just by updating the operating system to the latest version.
13. Resetting everything
Suppose all the above methods of solving the sound not working on iPhone error fails. You are then left with only one option and that is to reset the phone settings. The sound, network and display configurations will be set to its default.
- Just open Settings.
- Go to General and then Reset and finally Reset All Settings.
14. Contact Apple Support
If you don’t want to try the above method to solve the no sound on iPhone error, you can always reach out to Apple Support to help you out. Contact them and tell them how you hear no sound on iPhone.